(Papers) SSC Junior Engineer Exam Paper – 2018 “held on 27 Jan 2018” Morning Shift (Elecrical Engineering)
Presently you have decided to progress toward becoming SSC official and searching for the books and study materials to accomplish your objective. All things consider, you are on the correct place. Presently We are Sharing With You (Papers) SSC Junior Engineer Exam Paper - 2018 "held on 27 Jan 2018" Morning Shift (Elecrical Engineering).
This article which is based on (Papers) SSC Junior Engineer Exam Paper - 2018 "held on 27 Jan 2018" Morning Shift (Elecrical Engineering). , a part of our most viewed notes on www.sscpdfhub.com, which we think our readers not supposed to miss. Readers may download the each of the notes as PDF free of cost just click on Download button. Check out latest study materials at our Website SSCPDFHUB on daily basis also you can enter your email to subscribe our website to get notification of new posts by E-mail.
Read This Also:
Read This Also:
UPSC, IAS, IPS, IFS, PCS, UPPSC, SSC CGL, BANK, RAILWAYS, RRB NTPC, LIC AAO, Patwari, TET, BED, etc. Examinations are going to start after a few months. In these examinations, many questions are coming from different study materials provided at our website www.sscpdfhub.com. So, therefore, (Papers) SSC Junior Engineer Exam Paper - 2018 "held on 27 Jan 2018" Morning Shift (Elecrical Engineering). is a important subject in all these examinations. We will provide you the PDF books and notes at our Website which include (Papers) SSC Junior Engineer Exam Paper - 2018 "held on 27 Jan 2018" Morning Shift (Elecrical Engineering). . Which is helpful for all those aspirants who preparing for all these examinations at various level. Previous years questions are placed in Syllogism Questions, which has been put together in most examinations; you can download these PDF Notes simply by clicking on the Download Button at the bottom.
This post is dedicated to all the needy aspirants who want to download our SSCPDF materials, which is based on the latest exam pattern like SSC CGL, BANK, RAILWAYS, RRB NTPC, LIC AAO, etc. (Papers) SSC Junior Engineer Exam Paper - 2018 "held on 27 Jan 2018" Morning Shift (Elecrical Engineering). in English helps in improving your knowledge and automatically improves your marks in competitive examinations.
(Papers) SSC Junior Engineer Exam Paper – 2018 “held on 27 Jan 2018” Morning Shift (Elecrical Engineering)
QID : 301 – Why are same types of cells connected in parallel?
Options:
1) To decrease the voltage rating
2) To increase the voltage rating
3) To decrease the current rating
4) To increase the current rating
Correct Answer: To increase the voltage rating
QID : 302 – There are N resistances, each are connected in parallel having value R with equivalent resistance of X. What will be the total resistance when these N resistances are connected in series?
Options:
1)
2)
3)
4)
Correct Answer:
QID : 303 – Which of the following is equivalent to 0.5 kWh?
Options:
1) 1800000 W
2) 1800000 J
3) 18000000 J
4) 36000000 J
Correct Answer: 1800000 J
QID : 304 – What is the conductivity (in Mhos/m) of a 2 Ohm circular wire, when the length and the diameter of the wire are 10 m and 0.8 m respectively?
Options:
1) 10
2) 1
3) 0.1
4) 5
Correct Answer: 10
QID : 305 – ‘Erg’ is a unit of measurement for ________.
Options:
1) Energy
2) Power
3) Voltage
4) Impedance
Correct Answer: Energy
QID : 306 –
Options:
1) 4.56
2) 5.67
3) 18.58
4) 51
Correct Answer: 5.67
QID : 307 –
Options:
1) 1
2) 1.42
3) 3.2
4) 7
Correct Answer: 3.2
QID : 308 – Which of the following quantity will remain the same, when a layer of Teflon is inserted between the plates of a charged parallel plate capacitor?
Options:
1) Capacitance
2) Charge
3) Energy of the capacitor
4) Potential
Correct Answer: Charge
QID : 309 – What will be the value of resistance (in kilo-ohms) of a carbon composition resistor having color-coding of brown-black-brown-black?
Options:
1) 400
2) 200
3) 300
4) 100
Correct Answer: 100
QID : 310 – Which of the following is NOT a type of capacitor?
Options:
1) Ceramic
2) Electrolytic
3) Film
4) Wire wound
Correct Answer: Wire wound
QID : 311 – Which of the following is TRUE in case of Substitution theorem?
Options:
1) The initial condition of the rest of the circuit changes, if a network element is replaced by a voltage source having an equal voltage as the voltage across the element at every instant of time.
2) The initial condition of the rest of the circuit changes, if a network element is replaced by a voltage source having an equal current as the voltage across the element at every instant of time.
3) The initial condition of the rest of the circuit remains same, if a network element is replaced by a voltage source having an equal voltage as the voltage across the element at every instant of time.
4) The initial condition of the rest of the circuit changes, if a network element is replaced by a voltage source having an equal voltage as the current across the element at every instant of time.
Correct Answer: The initial condition of the rest of the circuit remains same, if a network element is replaced by a voltage source having an equal voltage as the voltage across the element at every instant of time.
QID : 312 – Which of the following theorem states that the sum of instantaneous power in ‘n’ number of branches of an electrical network is zero?
Options:
1) Compensation
2) Maximum power transfer
3) Superposition
4) Tellegen’s
Correct Answer: Tellegen’s
QID : 313 – Kirchhoff’s voltage law is based on which of the following principle?
Options:
1) Conservation of charge
2) Conservation of energy
3) Conservation of force
4) Conservation of momentum
Correct Answer: Conservation of energy
QID : 314 –
Options:
1) 6
2) 10
3) 12
4) 16
Correct Answer: 12
Click Here To Download PDF
DOWNLOAD SSC J.E. SOLVED Question Papers PDF
DOWNLOAD SSC JUNIOR ENGINEER Exam General Awareness PDF
DOWNLOAD SSC CGL (Tier-1) 2020 SOLVED Question Papers PDF
DOWNLOAD SSC CHSL (10+2) Exam SOLVED Question Papers PDF
Study Material for Junior Engineer (Civil / Electrical / Mechanical Engineering) Examination
Study Kit for SSC CGL EXAM
QID : 315 –
Options:
1) 5 + j 2
2) 5 – j 2
3) 2 + j 5
4) 2 – j 5
Correct Answer: 5 – j 2
QID : 316 –
Options:
1) 30
2) 45
3) 60
4) 75
Correct Answer: 45
QID : 317 –
Options:
1) 0
2) 25
3) 125
4) 156.25
Correct Answer: 0
QID : 318 –
Options:
1) 3
2) 4
3) 5
4) 6
Correct Answer: 5
QID : 319 –
Options:
1) 18
2) 30
3) 45
4) 90
Correct Answer: 45
QID : 320 –
Options:
1) 1.167, 12
2) 2.345, 14
3) 4.434, 16
4) 2.346, 10
Correct Answer: 1.167, 12
QID : 321 – The S.I unit of electric charge is ______.
Options:
1) Henry
2) Coulomb
3) Tesla
4) Weber
Correct Answer: Coulomb
QID : 322 – Which of the following is a diamagnetic material?
Options:
1) Aluminium
2) Oxygen
3) Lead
4) Nickel
Correct Answer: Lead
QID : 323 – Which of the following material shows paramagnetism?
Options:
1) Copper
2) Iron
3) Titanium
4) Silver
Correct Answer: Titanium
QID : 324 – Which of the following is the CORRECT expression for Gauss’ Law?
Options:
1)
2)
3)
4)
Correct Answer:
QID : 325 – Determine the intensity of magnetization (in A/m) of a magnet, when its pole strength is 100 Wb and has a pole area of 70 sq. m.
Options:
1) 4.98
2) 3.65
3) 2.53
4) 1.43
Correct Answer: 1.43
QID : 326 – Hysteresis loss occurring in a material does NOT depend on which of the following parameters?
Options:
1) Hysteresis constant
2) Magnetic flux density
3) Frequency
4) Reluctivity
Correct Answer: Reluctivity
QID : 327 – Determine the eddy current loss (in W) in a material having eddy current coefficient of 1, thickness of 0.02 m and a volume of 1 cubic metre, which is kept in a magnetic field of maximum flux density of 2 T and supplied by a frequency of 50 Hz.
Options:
1) 2
2) 3
3) 4
4) 5
Correct Answer: 4
QID : 328 – What will be the self-inductance (in mH) of a 4 m long air-core solenoid, if the diameter of the solenoid is 50 cm and has 300 turns?
Options:
1) 5.54
2) 6.94
3) 7.85
4) 8.64
Correct Answer: 5.54
QID : 329 – What is the coupling factor between the two coils, each having self inductance of 25 mH and the mutual inductance between the two is 25 mH?
Options:
1) 0.5
2) 0.75
3) 1
4) 2
Correct Answer: 1
QID : 330 – Determine the magnitude of the EMF (in V) induced between the axis of rotation and the rim of the disc, when the disc of radius 10 cm rotates with an angular velocity of 10 revolutions per second, which is placed in a magnetic field of 4 T acting parallel to the rotation of the disc.
Options:
1) 0.5
2) 0.75
3) 1
4) 1.25
Correct Answer: 1.25
QID : 331 – Determine the peak value (in A) of the current used by a motor rated at 220 V, 30 A.
Options:
1) 21.2
2) 30
3) 42.4
4) 51.9
Correct Answer: 42.4
QID : 332 – What will be the frequency (in Hz) of a sinusoidal wave, when the time period is 20 ms?
Options:
1) 50
2) 60
3) 40
4) 30
Correct Answer: 50
QID : 333 –
Options:
1) 9.36
2) 7.87
3) 8.66
4) 4.42
Correct Answer: 8.66
QID : 334 – At resonant frequency, the impedance of a series resonant circuit is _______________.
Options:
1) zero
2) maximum
3) infinite
4) minimum
Correct Answer: minimum
QID : 335 – Determine the value of the phase angle (in degrees) in a series RC circuit having a resistance of 20 ohms and capacitive reactance of 11.56 ohms when supplied by a frequency of 50 Hz.
Options:
1) 60
2) 30
3) 90
4) 45
Correct Answer: 30
QID : 336 – A 3-phase delta connected system is supplied by a line voltage of 200 V. The value of phase current is 30 A. What is the total power consumed (in W) by the system, if the current lags the voltage by 30 degrees?
Options:
1) 16.32
2) 14.45
3) 15.59
4) 16.69
Correct Answer: 15.59
QID : 337 –
Options:
1) 0.126
2) 1.26
3) 12.6
4) 126.1
Correct Answer: 0.126
QID : 338 – Determine the reactive power (in kVAR) of a 3-phase delta connected system having a line voltage of 400 V, line current of 40 A and the phase difference between the voltage and current is 45 degrees.
Options:
1) 14.4
2) 15.8
3) 18.7
4) 19.6
Correct Answer: 19.6
QID : 339 – Determine the quality factor of a series RLC circuit, when the value of capacitance is 0.02 mF, the value of inductance is 8 mH and the value of resistance is 40 ohms.
Options:
1) 0.5
2) 0.4
3) 0.8
4) 1.3
Correct Answer: 0.5
QID : 340 – What will be the time (in seconds) taken by the inductor reach its maximum steady state value in a series RL circuit, when the value of the inductance is 0.8 H and the value of the resistance is 10 Ohms?
Options:
1) 0.2
2) 0.6
3) 0.4
4) 0.8
Correct Answer: 0.4
QID : 341 – Which one of the following is the dimension of energy?
Options:
1)
2)
3)
4)
Correct Answer:
QID : 342 – Which one of the following statement is NOT TRUE about the MI type instruments?
Options:
1) MI type Instruments are suitable for both AC and DC circuits.
2) Frictional error in MI type instruments is very less.
3) The torque weight ratio of MI type instruments is high.
4) The instrument cost is much higher as compared to PMMC type instruments.
Correct Answer: The instrument cost is much higher as compared to PMMC type instruments.
QID : 343 – Which one of the following statement is NOT TRUE about multimeter?
Options:
1) Multimeter can be used for the measurement of voltage.
2) Multimeter can be used for the measurement of power.
3) Multimeter can be used for the measurement of resistance.
4) Multimeter can be used for the measurement of current.
Correct Answer: Multimeter can be used for the measurement of power.
QID : 344 – Which one of the following is the main cause of magnetic decay in PMMC type instrument?
Options:
1) Variation in the resistance of the moving coil
2) Quality of spring
3) Aging of the spring
4) Aging of the magnets
Correct Answer: Aging of the magnets
QID : 345 –
Options:
1) 2
2) 1
3) 0
4) 4
Correct Answer: 2
QID : 346 – Determine the apparent power (in W) of a circuit, if the circuit have a power factor of 0.8 and the reactive power of the circuit is 60 W.
Options:
1) 80
2) 75
3) 60
4) 55
Correct Answer: 75
QID : 347 – A building has 3 floors and each floor has 4 fans of 50 W that operates for 12 hours a day and one air conditioner of 3000 W that operates for 2 hours per day in the month of the June. Determine the energy consumption (in kWh) of the building in June.
Options:
1) 512
2) 252
3) 756
4) 504
Correct Answer: 756
QID : 348 – Determine the reading (in kW) of both the wattmeters used to measure the power of a three-phase three-wire system having input of 6 kW and power factor of 1.
Options:
1) 4, 2
2) 5, 1
3) 3, 3
4) 6, 0
Correct Answer: 3, 3
QID : 349 – What will be the secondary voltage (in V) of a potential transformer, if the value of system voltage is 11,000 V, the turn’s ratio of the potential transformer is 108 and the percentage voltage error of the transformer is 5%?
Options:
1) 86.8
2) 93.6
3) 84.6
4) 96.8
Correct Answer: 96.8
QID : 350 – Determine the full-scale reading (in V) of a PMMC type voltmeter, when the internal resistance of the voltmeter is 230 kilo-ohms, the series resistance connected with the voltmeter is 70 kilo-ohms and the sensitivity of the voltmeter is 3 kilo-ohms/volt.
Options:
1) 200
2) 150
3) 100
4) 250
Correct Answer: 100
QID : 351 – The brush contact losses in a d.c. machine is
Options:
1) Inversely proportional to the square of current
2) Directly proportional to the square of current
3) Inversely proportional to the current
4) Directly proportional to the current
Correct Answer: Directly proportional to the current
QID : 352 – In which transformer, the tertiary winding is used
Options:
1) Star – delta
2) Star – star
3) Delta – delta
4) Delta – star
Correct Answer: Star – star
QID : 353 – Secondary winding of an auto transformer is also called_____.
Options:
1) compensating winding
2) common winding
3) tertiary winding
4) damping winding
Correct Answer: common winding
QID : 354 – The maximum allowable voltage between adjacent segment is
Options:
1) 10-20V
2) 20-30V
3) 40-50V
4) 30-40V
Correct Answer: 30-40V
QID : 355 – The field control of a DC shunt motor gives_____.
Options:
1) constant torque drive
2) constant kW drive
3) constant speed drive
4) variable load speed drive
Correct Answer: constant kW drive
QID : 356 – The no load current in a transformer is
Options:
1) Sinusoidal
2) nonSinusoidal
3) Trapezoidal
4) stepped
Correct Answer: nonSinusoidal
QID : 357 – Transformer cooling and insulation oil must be of
Options:
1) low viscosity
2) high viscosity
3) low BDV
4) low resistivity
Correct Answer: low viscosity
QID : 358 – Single Phase transformers can be used in parallel only when their voltages are
Options:
1) Equal
2) Unequal
3) Zero
4) None of these
Correct Answer: Equal
QID : 359 – When the phase sequence of supply currents are reversed, then the direction of rotation of the resultant magnetic field wave
Options:
1) not unchanged
2) to and fro
3) reversed
4) None of these
Correct Answer: reversed
QID : 360 – The availability of full -rated torque at starting is obtained from induction motor is
Options:
1) rotor resistance control
2) stator voltage control
3) slip ring control
4) line current control
Correct Answer: rotor resistance control
QID : 361 – The starting torque of a 1-phase induction motor is
Options:
1) High
2) Moderate
3) Low
4) Zero
Correct Answer: Zero
QID : 362 – In a shaded pole single-phase motor, the revolving field is produced by the use of
Options:
1) inductor
2) capacitor
3) resistor
4) shading coils
Correct Answer: shading coils
QID : 363 – The repulsion-start induction-run motor is used because of______.
Options:
1) good power factor
2) high efficiency
3) minimum cost
4) high starting torque
Correct Answer: high starting torque
QID : 364 – The rotor slots, in an induction motor, are usually not quite parallel to the shaft because it
Options:
1) improves the efficiency
2) helps the rotor teeth to remain under the stator teeth
3) helps in reducing the tendency of the rotor teeth to remain under the stator teeth
4) improves the power factor
Correct Answer: helps in reducing the tendency of the rotor teeth to remain under the stator teeth
QID : 365 – A shaded pole motor can be used for
Options:
1) toys
2) hair dryers
3) circulators
4) any of the options
Correct Answer: any of the options
QID : 366 – The rotor of a hysteresis motor is made of
Options:
1) aluminium
2) cast iron
3) chrome steel
4) copper
Correct Answer: chrome steel
QID : 367 – The main advantage of AC transmission system over DC transmission system is
Options:
1) easy transformation
2) less losses in transmission over long distances
3) less insulation problems
4) less problem of instability
Correct Answer: less losses in transmission over long distances
QID : 368 – Next lower voltage line feeding areas on either side of the main transmission line is called
Options:
1) secondary distribution
2) secondary transmission
3) primary transmission
4) primary distribution
Correct Answer: secondary transmission
QID : 369 – ACSR stands for
Options:
1) All Copper Standard Reinforced Conductor
2) Aluminium Conductor Steel Reinforced Conductor
3) Aluminium Copper Steel Reinforced Conductor
4) All Copper Steel Reinforced Conductor
Correct Answer: Aluminium Conductor Steel Reinforced Conductor
QID : 370 – The insulating material for cables should have
Options:
1) high dielectric strength
2) high mechanical strength
3) low cost
4) all options are correct
Correct Answer: all options are correct
QID : 371 – The main source of hydro-electric power station is
Options:
1) coal
2) generator
3) water
4) nuclear
Correct Answer: water
QID : 372 – The function of circuit breaker is
Options:
1) to safe guard the circuit
2) to On and Off the circuit
3) to safe human life
4) None of these
Correct Answer: to safe guard the circuit
QID : 373 – Wiring clips are usually made of
Options:
1) copper
2) steel
3) Brass
4) aluminium
Correct Answer: steel
QID : 374 – The switch unit need not be on the what type of wire
Options:
1) Phase
2) Neutral
3) earth
4) any of the options
Correct Answer: Neutral
QID : 375 – One unit of electrical energy equals
Options:
1) 1Kwh
2) 1Wh
3) 10 Wh
4) 100 Wh
Correct Answer: 1Kwh
QID : 376 – Filaments of electric bulbs are usually made of
Options:
1) Nichrome
2) carbon
3) copper
4) tungsten
Correct Answer: tungsten
QID : 377 – Insulation resistance is expressed by
Options:
1) ohm
2) milli ohm
3) mega ohm
4) micro ohm
Correct Answer: mega ohm
QID : 378 – In which of the following equipments, current rating is not necessary?
Options:
1) circuit breaker
2) relay
3) Isolator
4) load break switch
Correct Answer: Isolator
QID : 379 – which type of fan used between dust collector and chimney in thermal power plant
Options:
1) Forced draft
2) Induced draft
3) Ceiling fan
4) Table fan
Correct Answer: Induced draft
QID : 380 – Who invented the electric bulb?
Options:
1) Tesla
2) Marconi
3) Edison
4) Benjamin
Correct Answer: Edison
QID : 381 – Incandescent lamp is filled by
Options:
1) argon gas
2) oxygen gas
3) carbon di oxide
4) Sulphur oxide
Correct Answer: argon gas
QID : 382 – In house wiring which type of insulation is used?
Options:
1) rubber
2) P.V.C
3) V.I.R
4) Paper
Correct Answer: rubber
QID : 383 – The unit of solid angle is
Options:
1) Solid angle
2) Radian
3) Steradian
4) Candela
Correct Answer: Steradian
QID : 384 – In case of frosted GLS lamps, frosting of shell is done by_____.
Options:
1) Acid etching
2) ammonia
3) ozone
4) salt water
Correct Answer: Acid etching
QID : 385 – The resistance of arc
Options:
1) Decreases with increase of the current
2) Increases with increase of the current
3) Does not depend on current
4) None of these
Correct Answer: Decreases with increase of the current
QID : 386 – For welding duty the rectifier commonly used are
Options:
1) Mercury arc rectifier
2) Selenium metal rectifier
3) Both Mercury arc rectifier and Selenium metal rectifier
4) None of these
Correct Answer: Selenium metal rectifier
QID : 387 – The device necessarily used for automatic temperature control in a furnace is
Options:
1) Thermostat
2) Auto-transformer
3) Thermo-couple
4) Any of the options
Correct Answer: Thermo-couple
QID : 388 – The ideal method of heating plastics is
Options:
1) Coal/oil fired furnace
2) Dielectric heating
3) Induction heating
4) Resistance heating
Correct Answer: Dielectric heating
QID : 389 – Which of the following element belongs to the same group of periodic tables as that of silicon and lead?
Options:
1) Phosphorous
2) Carbon
3) Arsenic
4) Mercury
Correct Answer: Arsenic
QID : 390 – The merging of a free electron and a hole is known as
Options:
1) recombination
2) extrusion
3) absorption
4) adsorption
Correct Answer: recombination
QID : 391 – The circuit that would be used for 455 kHz, if amplifier is
Options:
1) resistance loaded
2) double tuned transformer
3) video amplifier
4) class C
Correct Answer: double tuned transformer
QID : 392 – A transistor is a combination of two p-n junction with their
Options:
1) p region connected together
2) n region connected together
3) n region connected to other p region
4) p region connected together and n region connected together
Correct Answer: p region connected together and n region connected together
QID : 393 – What are the ON/OFF terminals of a transistor when it is operated as a switch?
Options:
1) Collector to base
2) Collector to emitter
3) Base to collector
4) Emitter to base
Correct Answer: Collector to emitter
QID : 394 – If negative feedback is used in the amplifier circuit, it______.
Options:
1) increases distortion
2) increases gain
3) reduces distortion
4) no effect on distortion
Correct Answer: reduces distortion
QID : 395 – The power factor of a synchronous motor ,When the field is under-excited
Options:
1) leading
2) unity
3) lagging
4) zero
Correct Answer: lagging
QID : 396 – To limit the operating temperature of synchronous motor, it should have proper
Options:
1) current rating
2) voltage rating
3) power factor
4) speed
Correct Answer: current rating
QID : 397 – A synchronous machine with large air gap has_______.
Options:
1) a higher value of stability limit
2) a higher synchronizing power
3) a small value of regulation
4) all options are correct
Correct Answer: all options are correct
QID : 398 – synchronous motors peed
Options:
1) decreases as the load decreases
2) increases as the load increases
3) always remains constant
4) None of these
Correct Answer: always remains constant
QID : 399 – The magnitude of field flux in a 3-phase synchronous machine
Options:
1) varies with speed
2) remains constant at all loads
3) varies with power factor
4) varies with the load
Correct Answer: remains constant at all loads
QID : 400 – In a synchronous motor, the magnitude of back e.m.f depends on______.
Options:
1) speed of the motor
2) d.c. excitation only
3) load on the motor
4) both the speed and rotor flux
Correct Answer: d.c. excitation only
Click Here To Download PDF
DOWNLOAD SSC J.E. SOLVED Question Papers PDF
DOWNLOAD SSC JUNIOR ENGINEER Exam General Awareness PDF
DOWNLOAD SSC CGL (Tier-1) 2020 SOLVED Question Papers PDF
DOWNLOAD SSC CHSL (10+2) Exam SOLVED Question Papers PDF
Study Material for Junior Engineer (Civil / Electrical / Mechanical Engineering) Examination
Study Kit for SSC CGL EXAM
<<Go Back To Main Page
Please let us know, through your comments, which PDF Notes you want. We will try our level best to provide you that study material for your preparation not for commercial use. If You want to share Your Study Material with Other Aspirants Please send Us at sscpdfhub@gmail.com Please share this post with the needy aspirants.
All SSCPDF Notes are available on this website for Educational purpose only. Not for commercial use.